Payment & Shipping Terms:
|Thickness:||2.3mm, 2.4mm, 2.5mm, 3.0mm, 4mm||Width:||600mm, 620mmm, 1500mm, 2000mm|
|Specification:||GB/T3280 GB/T4238 JIS G 4305 JIS G4304 ASTM 240/A-240M En10088-2||Steel Grade:||304, 304L And 304J1|
|Coil Weight:||14-17MT||Popular Market:||VN Makret, Korea|
carbon steel voil,
steel hot rolled coil
Heat Resistant Parts Hot Rolled Steel Coil , Low Carbon Steel Coil 304J1
Our Hot Rolled Steels are produced to meet the strictest chemistry and dimensional requirements, in a wide variety of grades.
A common austenitic steel with good corrosion resistance, thermal resistance, mechanical properties, and nonmagnetic
Application: Architecture, Decoration, Chemical industry, food processing equipment, Medicine, Fiber industry and Auto components
Low-carbon type of 304 with all qualities of 304, also with excellent inter-granular corrosion resistance and weldablity
Application: Chemical, Coal, Petroleum and Nuclear energy industries, the heat-resistant parts and the parts that are difficult to make heat treatment after welding
Austenitic stainless steel, nonmagnetic,
Lower contents of Ni compared with 304, low cost;
Excellent formability and deep drawability with the addition of Cu;
Similar tensile strength and corrosion resistance to conventional 304
Application: with excellent formability and weldability, 304J1 can be widely used in Kitchen utensil, electrical appliance, construction decoration and other aspects. It’s a new grade with multi-functions
|Steel Grade||C (%)||Mn (%)||Ni (%)||Cr (%)|
|Steel Grade||Y.S (Mpa)||T.S (Mpa)||E.L (%)||Hardness|
304 Grade Stainless steel-Finishes-applications:
Hot rolled, annealed, pickled, normally used as cold rolled material, industrial tanks and devices for chemical industry, etc
Cold rolled, annealed, pickled and dull finish products. Mainly used as automotive components; deep drawing parts, building components and pipes, etc.
Cold rolled, annealed, pickled, and skin-passed to give an appropriate luster at final stage. Their glossiness and flatness are better than No.2D products. They can be competent for almost all the applications of cold-rolled stainless steel, such as kitchen and bathroom ware, surface polishing, furniture structural parts, etc.
The products achieved by grinding of No.2D surface with No.100~120 grinding belt. They have better glossiness and discontinuous coarse grain, and are used in inside and outside decoration of buildings, electrical appliance and kitchen installation, etc.
The products achieved by grinding of No.2D surface with No.150~320 grinding belt. They have better glossiness and discontinuous coarse grain, but their grain is finer than No.3. They are used in elevator decoration, kitchen installation, inside and outside decoration of buildings, electrical appliance front panel, etc.
The products achieved by continuous grinding of No.2D surface with polishing abrasive belt with appropriate grain size. They have relatively long continuous grinding stripe (further divided into No.150~320), and are mainly used in building decoration and elevator decoration, etc.
Cold-rolled, bright annealed and skin passed products with extremely good surface glossiness and high reflectivity are used in building decoration, home appliance product and kitchen installation, etc.
The products achieved by appropriate rolling of No.2D or No.2B surface with dull roll. They have matte finish and are used in building decoration and elevator decoration.
Scope of application:
Cold rolling or cold forming
Cold rolling Or cold pressing
Contact Person: Yuli