Payment & Shipping Terms:
|Material:||SS Coil, CR Coil, GI Coil, Aluminum||Material Weight:||Max 20 T|
|Material Thickness:||1mm – 2 Mm||Material Width:||500- 1600mm|
|Material Inner Diameter:||508mm||Material Outside Diameter:||1600mm|
roll forming equipment,
roll former machine
JONSEN Two-Side-One-Pass Deburring Machine SB1300
JONSEN Two-Sided Deburring Machine
Model: SB1300 Introduction
Automatic removal of burrs while rounding and smoothing edges on both sides of a metal work piece in one pass. The SB1300 two-sided deburring and edge rounding machine is designed to machine "burr free" edges on flat sheet metal components produced by laser cutting or mechanical punching. This machine will provide excellent performance with a markedly reduced consumption of abrasive media when compared to wide belt sanders
The JONSEN SB1300 is a Two-Side-One-Pass Deburring & Edge Rounding Machine with dry operation. The patented design provides for abrasive block rotating along horizontal axes that apply abrasive media to each side of the part in different directions.
All interior and exterior contours are processed effectively as the part moves in the feed direction. Laser vinyl film or galvanized layer will not removed. The edges will be slightly rounded. The height of the abrasive belt is 40mm (1.5”) and is adjustable to compensate for the thickness of the part and assure long life of the deburring block units.
Abrasive belts consist of a base rubber belt and 100 abrasive block units fastened to the base belt. Block units and belts are easily changed when service life is reached or when a different abrasive media is required.
With 20 years of experience in building machines for metal fabrication, JONSEN organizes advanced abrasive materials by unique of mechanical arrangement for achieving excellent performance in this developed machine.
Max. Working width: 1300mm
Min. working length: 180mm
Machine opening: 180mm
Min. working thickness: 1mm
Conveyor speed: 1-5m/min Variable speed
Deburring belt compensation height: 35mm
Dust extraction capacity: 4000m3/h
Total power consumption: 24KW, Voltage380V, 3 phase 50HZ
Feeding table height: 800mm (31.5”)
PLC control: Mitsubishi GS2107-WTBD
Deburring block unit types: Abrasive flap/scotch brite type
Weight: Approx. 4000KGS
Warranty: one year machine, rubber parts 6 months.
1.Additional Abrasive belt grinding station.
Recommended for removing heavy slag resulting from thermal cutting.
2. Wet type stainless dust collector, capacity 4000m3/h
Contact Person: Bin Pan