Payment & Shipping Terms:
|Name:||4 X 10 Stainless Steel Sheet||Length:||As Per Customer|
|Thickness:||3-14mm||Width:||1000, 1219, 1220, 1250, 1500, 1800, 2000|
stainless steel sheet metal,
Thin 4 X 10 Stainless Steel Metal Sheet / Decorative Mirror Finish Stainless Steel Sheet
Stainless Steel Metal Sheet Description:
4 X 10 Stainless Steel Sheet are iron-base alloys that contain a minimum of about 12% Cr,the amount needed to prevent the formation of rust in unpolluted atmospheres (hence the designation stainless). Few stainless steels contain more than 30% Cr or less than 50% iron.They achieve their stainless characteristics through the formation of an invisible and adherent chromium rich oxide film. This oxide forms and heals itself in the presence of oxygen. Other elements added to improve particular characteristics include nickel, manganese, molybdenum, copper, titanium, silicon, niobium, aluminum, sulfur, and selenium. Carbon is normally present in amounts ranging from less than 0.03% to over 1.0% in certain grades.
|Classification||Standard of country||Chemical Composition|
|USA||C Max||Si Max||Mn Max||P Max||S Max||Ni||Cr||Mo|
|420||0.26 - 0.40||1||1||0.04||0.03||0.6||12.00-14.00||-|
Different Finished Surface Characteristic:
No 1: Some of the thinner thicknesses within the plate range are Cold Rolled; but Sheet, Coil and Strip gauges are produced by Cold Rolling, ie rolled without and heating of the material. Cold Rolling hardens the material, and the thinner sizes may have to be subjected to an intermediate anneal and pickle, or bright annealed, during the reduction of thickness to final gauge The starting material for Cold Rolling always has a No. 1 finish. Cold Rolled material is supplied with the following standard mill finishes.
No 2A: A no. 1 Finish after being Cold Rolled, Annealed, Pickled and Passivated. This results in a uniform dull matt finish, superior to a No. 1 Finish. Suitable for industrial application, and eminently suitable for severe deep drawing as the dull surface, (which may be polished after fabrication) retains the lubricant during the drawing operation.
NO. 2B: The surface brightness and flatness of no2B is better than no2D. Then through a special surface treatment to improve its mechanical properties, No2B could nearly satisfy comprehensive uses.
Hot rolled coil:
Cold rolled sheet:
1. 24 hours on line and prompt reply;
2. Free sample offered;
3. Flexible payment term with L/C at sight,TT ,ect;
4. Big quantity supply and short delivery time;
5. Long period after-sale service.
We are Looking for the sole agent of oversea agent!
Who can be our (sole)agent:
With good experience in steel biz,good connections with various endbuyers in the country,to be powerful in developing new customers.
The agent should collect market information including prices and demands and report to Fortune Best regularly to analyze market demand,shall develop new customer and bring new business to us.
Agent protection policy:
Any client brought by the agent will be channelized through this agent in reasonable period. If you are chosen to be our sole agent in your country/area,all the orders related to your territory shall share margin with you.
Daily business running is on its own cost. We don’t pay agent monthly fee or salary. Agent will enjoy min.30% of total pure margin (pure margin means total margin deduct financial charges), which is to be paid within 7 days after Fortune Best receiving payment from clients.
Add: Units 9-16, 47/F., World Trade Tower, No. 686, Jiefang Avenue, Wuhan, China
Tel: +86-27-8544 8800 Fax: +86-27-8544 8789 Mobile:+86-1380 7179 585
Contact Person: Bin Pan