Payment & Shipping Terms:
|Yield Strength:||≤320MPa||Tensile Strength:||≤370MPa|
cold rolled stainless steel coil,
steel sheet coil
AISI ASTM29 GB SPCF Cold Rolled Steel Coil / Low Carbon Steel Plate
Cold rolled coil is produced by pickling hot-rolled coil and rolling it uniformly at an appropriated temperature to a thinner thickness. It has excellent surface configuration and superb mechanical properties for use in automobile and electronic appliance production.
1. Product Name: Cold rolled Steel Coil/sheet/strip
2. Thickness: 0.4mm-3.0mm
3. Width: 600mm-2000mm
4. Length: As requested
5. Width tolerance: different as per different width
6. Thickness tolerance: different as per different thickness
7. Weight: According to the different requirement
8. Packing: Mill standard export packing in bundles
9. Country of Origin : China
10. Standard: AISI, ASTM29, DIN16723, EN10130, JIS, GB
11. Grade: SPCC, SPCD, SPCE, SPCH, ST12-15, DC01-06, Q195A-Q235A
12. Width: 600-2000mm (general width: 1000mm, 1250mm, 1500mm)
1). For the further producing of hot dip galvanized steel products
2). Auto manufacture, Oil drum, Transformer's tank panel, Furniture etc.
14. Packing: Strapped with min three strapping strips, covered by anti-water paper and plastic film, fixed on the iron or wooden pallets by strapping strips and covered by plastic bag to prevent damage from
15. Payment term: L/C, T/T
16. Delivery date: 10 days
17. General Specification:
|Commercial quality suitable for bending fabrication and simple forming; this is thetype in greatest demand.||Refrigerators, cabinets, power distribution baords and drums.|
|Drawing quality||SPCD||Drawing quality second only tothat of SPCEN. Excellent uniformity.||Automobile floor and roof panels.|
|Deep-drawing quality.With metallurgically controlled grain size, it retains its beautiful finish even after being deep-drawn.||Automobile fenders and quarter panels|
|Extra deep-drawing quality||SPCG||Extra-low-carbon steel sheets with highest workability||Automobile internal panels and deep-drawn parts|
|JIS G 3141:2005||SPCCT-SD SPCD-SD, SPCE-SD, SPCF-SD,SPCG-SD|
|ASTM A1008||CS TYPE A /B/ C DS TYPE A /B, DDS EDDS|
|EN10130:2005||DC01 DC03 DC04 DC05 DC06|
|EN10268:2006||HC420LA HC380LA HC340LA HC300LA HC260LA|
|SAE J403||SAE1006 SAE1008 SAE1010|
|JIS C2553||DC01EK DC03EK DC05EK|
Size Range: 0.30~3.0mm x 800--2000mm x Coil/Sheet
Coil ID: 508mm/610mm
Coil weight: 5—25MT
Bundle weight: max 2.5mt or max 5mt
Available Chinese Mill: WISCO,Capital Steel(Shougang), Ansteel, Maanshan, Baotou, Lianyuan, Tangshan, Jinan, Panzhihua, Kunming, etc and private mills
Stabilized Deep Drawing
Stabilized deep drawing quality products boast the highest quality in terms of workability. It is suitable for automotive parts that require complicated treatment such as front fenders or wire. As a non-aging deep drawing sheet made with Al-killed, quality is guaranteed against extreme stretching or straining.
Sheet of this quality is for simple bending or moderate forming. Commercial steel sheet can be bent flat upon itself in any direction at room temperature. It has a wide variety of uses, including automotive panels, electrical home appliances, drums, pipes, farm implements, office supplies, building and civil work materials, and as base metal for various coatings.
Sheet of this quality has a greater degree of ductility and is more consistent in performance than commercial steel because of higher standards in production, selection and melting of the steel. It is suitable for automotive panels, audio-visual equipment, and heating apparatuses.
Sheet of this designation should be used when drawing steel will not provide a sufficient degree of ductility for fabrication of parts with stringent drawing requirements, or applications that require the sheet be free from aging. This quality is produced through special steelmaking and finishing practices. It is suitable for automotive front panels and rear fenders.
Contact Person: Bin Pan