Product Details:
Payment & Shipping Terms:
|
Grade: | JIS G3141 SPCC | Thickness: | 0.15-3.0 |
---|---|---|---|
Width: | 600-2000 | Edge: | Slit Edge |
Oiled: | Yes | Hardness: | 40-65HRB |
High Light: | cr coil,steel sheet coil |
Deep Drawing SAE1010 Cold Rolled Steel Coil JIS G3141 SPCC Slit Edge
Description:
Cold rolled coil is produced by pickling hot-rolled coil and rolling it uniformly at an appropriated temperature to a thinner thickness. It has excellent surface configuration and superb mechanical properties for use in automobile and electronic appliance production.
Standard | Specification |
JIS G 3141:2005 | SPCCT-SD SPCD-SD, SPCE-SD, SPCF-SD,SPCG-SD |
ASTM A1008 | CS TYPE A /B/ C DS TYPE A /B, DDS EDDS |
EN10130:2005 | DC01 DC03 DC04 DC05 DC06 |
EN10268:2006 | HC420LA HC380LA HC340LA HC300LA HC260LA |
SAE J403 | SAE1006 SAE1008 SAE1010 |
JIS C2553 | DC01EK DC03EK DC05EK |
Size Range: 0.30~3.0mm x 800--2000mm x Coil/Sheet
Coil ID: 508mm/610mm
Coil weight: 5—25MT
Bundle weight: max 2.5mt or max 5mt
Available Chinese Mill: WISCO,Capital Steel(Shougang), Ansteel, Maanshan, Baotou, Lianyuan, Tangshan, Jinan, Panzhihua, Kunming, etc and private mills
Application | Features | Steel grades for example |
Commercial purposes | With some ductibility, they are suitable to simple forming, bending or welding | DC01, SPCC, St12 |
Drawing | With more ductibility than the common ones, they are suitable to manufacturing parts through drawing and relatively complicated deforming | DC03, SPCD, St13 |
Deep drawing | With more ductibility and homogeneity than the drawing ones, they are suitable to manufacturing parts through deep drawing and complicated deforming. | DC04,SPCE,St14 |
Extra-deep drawing | With more ductibility and homogeneity than the deep drawing ones, they are suitable to manufacturing parts through extra-deep drawing and more complicated deforming. | DC05, SPCF, St 15 |
Supreme extra-deep drawing | With more excellent drawing capability than the extra-deep drawing ones, they are suitable to manufacturing parts through supreme extra-deep drawing and extremely complicated deforming. | DC06, SPCG, St16 |
Steel grades | Yield strengthaMpa | Tensile strength Mpa | After breakage percent elongation(Lo=80mm,b=20mm)Aa%.≥ | rbc | nbc | ||||
<0.4 | 0.4~<0.6 | 0.6~<1.0 | 1.0~<1.6 | ≥1.6 | |||||
DC01 (St12) | 130~280 | 270~410 | 26 | 28 | 30 | 32 | 34 | - | - |
DC03 (St13) | 120~240 | 270~370 | 30 | 32 | 34 | 35 | 36 | 1.3 | - |
DC04 (St14) | 120~210 | 270~350 | 34 | 36 | 38 | 39 | 40 | 1.6 | 0.18 |
DC05 (St15) | 110~180 | 270~330 | 36 | 38 | 40 | 40 | 41 | 1.9 | 0.20 |
DC06 (St16) | ≤170 | 270~330 | 37 | 39 | 41 | 41 | 42 | 2.1 |
0.22 |
Classification | Designation | Characteristics | Main applications |
Commercial quality |
SPCC SPCCT |
Commercial quality suitable for bending fabrication and simple forming; this is thetype in greatest demand. | Refrigerators, cabinets, power distribution baords and drums. |
Drawing quality | SPCD | Drawing quality second only tothat of SPCEN. Excellent uniformity. | Automobile floor and roof panels. |
Deep-drawing quality |
SPCE SPCF |
Deep-drawing quality.With metallurgically controlled grain size, it retains its beautiful finish even after being deep-drawn. | Automobile fenders and quarter panels |
Extra deep-drawing quality | SPCG | Extra-low-carbon steel sheets with highest workability | Automobile internal panels and deep-drawn parts |
Contact Person: Bin Pan